Details
Accessories
Operations
Support car key matching models
BMW 1 Series：E81、E82、E87、E88、F20、F21、F52、F40
BMW 2 Series：F22、F23、F44、F45、F46
BMW 3 Series：E36、E46、E90、E91、E92、E93、F30、F31、F34、F35
BMW 4 Series：F32、F33、F36
BMW 5 Series：E34、E39、E60、E61、F07、F10、F11、F18
BMW 6 Series：E63、E64、F06、F12、F13
BMW 7 Series：E38、E65、E66、F01、F02、F03、F04
BMW 8 Series：E31
BMW X1：E84、F48、F49
BMW X2：F39
BMW X3：E83、F25
BMW X4：F26
BMW X5：E53、E70、F15
BMW X6：E71、E72、F16
BMW M2：F87
BMW M3：E90、E92、E93、F80
BMW M4：F82、F83
BMW M5：E60、F10、F90
BMW M6：E63、E64、F06、F12、F13
BMW M8：F91、F92
BMW X3 M：F97
BMW X4 M：F98
BMW X5 M：E70、F85、F95
BMW X6 M：F94
BMW Z3：E36、E37
BMW Z4：E85、E86、E89
BMW Z8：E52
BMW MINI：R50、R52、R53、R54、R55、R56、R57、R58、R60、R61、F54、F55、F56、F60
Porsche：911、Boxster987
About the function of BMW car key matching
Read key information：Read out the anti-theft information and key information of the vehicle，such as VIN、Anti-theft version、Remote control frequency、Key number, key ID, key type, and key position status.
Generate dealer key: After selecting the blank key bit, click this function to match the new key.
Synchronous ELV: When the steering wheel lock fails; when the key is matched, the car cannot start.
Synchronize DME: When the key is matched, the car cannot be started. Please execute this function to synchronize the DME and CAS system.
Restore key bit: When this key bit is used, it can be initialized.
Unlock key: restore the key to a brand new state, which can be used again.
Disable key: When the owner's key is lost, the relevant key bit can be shielded so that it no longer works on the vehicle.
Enable key: enable the disabled key bit to make the key work on the vehicle again.
Mileage reset: The device can read the mileage information of the anti-theft module, and execute this function to make the mileage become 0.
Exit shipping mode: When the vehicle is diagnosed with this fault code, please execute this function to eliminate the fault code and return the vehicle to normal.
Recovery code：After the car is matched with a new key, there is a failure of no coding file, this function can be used to restore the original coding file.
Replace FEM/BDC/CAS4：When the car module is faulty, use this function to help the vehicle replace the module.
Backup FAFP: Applicable to BMW FEM/BDC modules, backup original FAFP files.
Restore FAFP: Applicable to BMW FEM/BDC module, write the required FAFP file.
Reset starter lock: After replacing the BMW FEM/BDC module, the vehicle does not start, please execute this function.
Remote key repair: When the EEPROM chip on the BMW FEM/BDC module is damaged or the data is lost, causing the key to fail, you can use this function to repair the original car key.
Supports reading and writing BMW DME ISN models in OBD mode
B48、B58
MEVD172Y F10 MOTOR Engine electronics MEVD172 6 Cylinder
MEVD1724 F25 MOTOR Motor Electronics N20
MEVD1725 F20 MOTOR Motor Electronics N13
N63TU_R0 F01 MOTOR Engine electronics MEVD172 8 Cylinder N63TU Master
N63TU_L0 F01 MOTOR2 Engine electronics MEVD172 8 Cylinder N63 TU Slave
S63TU_R0 F10 MOTOR Engine electronics MEVD172 8 Cylinder S63TU Master
S63TU_L0 F10 MOTOR2 Engine electronics MEVD172 8 Cylinder S63 TU Slave
ME17N45 E87 MOTOR Motor Electronics N45
MEV17N46 E87 MOTOR Motor Electronics N46
MED17_2 R56 MOTOR Motor Electronics
MED17_2N R56 MOTOR Motor Electronics
MV1722 R56 MOTOR Motor Electronics N16
MVD1722 R56 MOTOR Motor Electronics N18H
MEVD174K E84 MOTOR Engine electronics ME VD17.2.4 4 Cylinder N20
MEVD17KW E70 MOTOR Motor Electronics N55
MEVD174K E84 MOTOR Motorelektronik ME VD17.2.9 4 Zylinder N20
MEVD176K E89 MOTOR Engine Electronics ME VD17.2.6 6 Zylinder N55 Bosch High pressure pump
MEV17_2 R56 MOTOR Motor Electronics
MSV70 E63 MOTOR Motor Electronics N52
MEV9N46L E87 MOTOR Motor Electronics N46
ME9N62 E65 MOTOR Motor Electronics N62
MEV9N46 E46 MOTOR Motor Electronics N46
N62_TUE E65 MOTOR Motor Electronics N62
N62_TUE2 E65 MOTOR Motor Electronics N62
MEV9N46L E87 MOTOR Motor Electronics N46
ME9N62 E60 MOTOR Motor Electronics N62
MEV9N46L E90 MOTOR Motor Electronics N45
ME9N62 E60 MOTOR Motor Electronics N62
MS450DS0 E60 MOTOR Motor Electronics M54
MS450DS0 E65 MOTOR Motor Electronics M54
ME9N62_2 Mor MOTOR Motor Electronics
ME9N62_2 E65 MOTOR Motor Electronics N62
ME9E65_6 E65 MOTOR Motor Electronics N62
ME9E65_6 E60 MOTOR Motor Electronics N62
ME9N45 E87 MOTOR Motor Electronics N45
ME9N45 E46 MOTOR Motor Electronics N45
N73_R0 E65 MOTOR Motor Electronics N73 Master
N73_L0 E65 MOTOR2 Motor Electronics N73 Slave
MSS60 E90 MOTOR Motor Electronics S65
Support the use of CGDI wiring harness to read and write BMW DME ISN models
N13(MEVD17.2.5)
N20(MEVD17.2.4/MEVD17.2.9/MEVD17.2.P)
N55(MEVD17.2/MEVD17.2.6/MEVD17.2.G)
N63/S63(MEVD17.2.8/MEVD17.2.H)
B38(MEVD17.2.3/MEVD17.2.K)
EDC17C06/EDC17C56/EDC17CP02
EDC17C50/EDC17CP49
EDC17CP09
EDC17CP45
MSD80、MSD81、MSD85、MSD87、MSV80、MSV90
Support BMW Service function
BMW Diagnosis: read and clear vehicle fault codes, and provide solutions.
BMW E Series Program：Suitable for BMW E series vehicles, read all module information, you can specify a module for programming.
BMW E Series Coding：It is suitable for BMW E series vehicles. It reads all module information, can specify a module for coding, and also supports modification of VO code and activation of hidden functions.
BMW F/G Series Program：It is suitable for BMW F/G series vehicles, reads all module information, can specify a module for programming, and also supports the initialization of airbag/sunroof/window modules.
BMW F/G Series Coding：It is suitable for BMW F/G series vehicles. It reads all module information, can designate a module for coding, and also supports modification of VO code and activation of hidden functions.
BMW EGS Computer repair and replacement
BMW E series: Support 6HP, functions include status detection, reset adaptation, VIN modification and ECU reset.
BMW F series: Support 6HP and 8HP, functions include data backup, erase reset and clear ISN.
BMW Data Repair
Support modules include CAS1, CAS2, CAS3, CAS4, FEM and BDC, and can modify frequency, VIN and ISN.
Supported DME models include N13, N20, N55 and B38, and VIN and ISN can be modified.
Support DME_ISN, EWS_ISN, KEY_CODE to calculate each other, used for CAS4 module and FEM/BDC module repair and replacement.
BMW CAS mileage reset
Support CAS1, CAS2 and CAS3, modify the mileage to 0.
BMW ICOM function
When this function is executed, the device will automatically register and you can use the original BMW software.
BMW EEPROM data read and write
Supports data reading and writing of the anti-theft chip 95128 of BMW FEM module (Free of dismantling)
Supports data reading and writing of the anti-theft chip 95256 of BMW BDC module (Free of dismantling)
Support BMW ELV chip 95040 data read and write (Free of dismantling)
Maserati car mileage modification
Support Levante (95320), Geberit (95160), President (95160), OBD mode, no need to disassemble, fast and stable.
Other functions
Actively check software and firmware, remind customers to upgrade;
Function classification, online authorization, to help customers quickly locate;
The equipment is automatically activated, breaking the time limit;
Built-in help and operation tutorial to eliminate customers' concerns about operating errors;
Customize and adjust the software interface and font size to meet the habits of each customer.
V3.2.4.1 NEW
(2024.09.12)
1. 4 new versions are added to the BDC key matching function:
(1) 085_010_100
(1) 085_010_110
(1) 085_010_130
(1) 085_011_120
2. Fix the problem of BDC key matching failure for version 085_010_080.
V3.2.4.0
(2022.11.04)
1.BMW EGS Change: Added 8HP(F) - Bench: (When connecting, it needs to be powered by the device)
（1）Read and write MAPS, read and write EEPROM, backup data, restore data functions
2.CAS Mileage Reset: add 9389115; fix 9287535、9395656
3.Fix some bugs and optimize software performance
V3.2.3.0
(2022.05.13)
1.BMW Data Repair: Added 'CAS3 Data Repair', Repair OBD downgrade failure data
2.N13/N20/N55/B38 Read/Write ISN: Fix 'Modify VIN'
3.Fix some bugs and optimize software performance
V3.2.2.0
(2021.08.30)
1. Added Italian version
2. BMW EGS Change: Added 6HP(E) - Bench:
(1)Read EGS ISN, EGS status, Clear EGS ISN, Modify VIN, ECU reset
3. Fix some bugs and optimize software performance
V3.2.1.3
(2021.06.18)
1. 'FEM/BDC Key Match', 'BMW E Series Coding', 'BMW F/G Series Coding', 'BMW Diagnosis' Function optimization
2. Fix some bugs and optimize software performance
V3.2.1.2
(2021.05.11)
1.Fix the problem of abnormal download of programming files
2.N13/N20/N55/B38 Read/Write ISN: Added type
(1)EDC17C56
(2)EDC17CP09
3.New in main interface - "Online tutorial"
V3.2.1.0
(2021.04.28)
1. BMW EGS Change: Added 6HP(E):
(1)Read EGS ISN, EGS status, Reset adaptation, Modify VIN, ECU reset
(2)Some EGS supports 'Read EGS ISN': 7576211, 7572988, 7582344, 7582348, 7567223, 7567224, 7567406, 7568222, 7572416, 7573660, 7575795, 7575796, 7591972, 7605219, 7606220, 7591971, 7599827, 7607116
2. CAS Mileage Reset: Added 'Sync ELV'
3. N13/N20/N55/B38 Read/Write ISN:
(1)Added 'Modify VIN'
(2)Added type: EDC17C06, MEVD17.2.8
4. FEM/BDC Key Match: Add 00002419.082_010_030, 00002419.083_010_010 two versions of FEM/BDC with key
5. BMW Diagnosis: updated version DIAG_4.28.12
6. Display optimization: BMW Data Repair, CAS1-3+ Key Match(OBD), BMW F/G Series Program
7. Technical support video update
8. Fix some bugs and optimize software performance
V3.2.0.1
(2021.01.18)
1. Fix CAS3 Key Match, CAS4 Key Match: Generate dealer key
2. Fix BMW Data Repair: Input the original key data
3. Fix BMW E Series Program: bootloader program
4. Fix some bugs and optimize software performance
V3.2.0.0
(2020.12.29)
1. Software interface optimization and upgrade
2. Porsche Key Learning added 2M25J chip Learning：Read basic information, Key learning, Load EEPROM
3. CAS4 Key Match(OBD) added "Repair remote key intelligence"
4. Key Match process and display optimization
5. BMW data Repair process optimization
6. Fix some bugs and optimize software performance
V3.1.4.0
(2020.07.10)
1. FEM/BDC Key Match:
(1.1) Added Remote key repair function
(1.2) Optimization Mileage reset
2. CAS4 Key Match(OBD): fix 1L15Y Mileage reset
3. N13/N20/N55/B38 Read/Write ISN: Added type
(3.1) EDC17CP02
(3.2) MEVD17.2.3
4. Optimization File loading: CAS3 Key Match, BMW Data Repair
V3.1.3.0
(2020.05.11)
1. Cas4 Key Match：Add fast pre-processing method, support 5M48H/1N35H/1L15Y:
1.1 Only 2 minutes for pretreatment
1.2 Support OBD backup D-FLASH (EEPROM), P-FLASH
1.3 Support OBD replacement CAS4
1.4 Display Optimization
2. N13/N20/N55/B38 Read/Write ISN: Added type
2.1 EDC17C50
2.2 EDC17CP45
2.3 EDC17CP49
2.4 MEVD17.2.H
3. BMW Data Repair: Added B38 modification VIN，ISN
V3.1.2.0
(2020.04.28)
1. BMW E Series Program: fix the problem of parking brake programming key failure
2. BMW Data Repair: when loading CAS3, CAS4 encrypted files, add the option to input the original key data
3. ICOM Function: Optimize connection
4. New and optimized interface:
4.1. Added Settings-software activation, technical support
4.2. Added After-sales contact information (upper left corner of the main interface)
V3.1.1.0
(2020.01.16)
1. Display Optimization
2. You cannot use the device with the old software version, please install the latest software version
V3.1.0.0
(2020.01.03)
1. Added Turkish version(Need authorization)
2. Firmware upgrade
V3.0.2.0
(2019.12.13)
1. Added BMW EGS Change(F Series-6HP) [Erase and reset]
2. Added BMW E Series Program [Advanced programming]
3. Optimize CAS4 Key Match, FEM/BDC Key Match, ISN Show window
4. Fix user registration issues
V3.0.1.0
(2019.11.09)
1. Added G_B48 B58 read ISN
2. Added MSV80 read ISN(BENCH)
3. Added ICOM function (does not support XP computer system)
4. Optimize CAS4 Key Match(OBD) processes
5. Optimize BMW Key Match(OBD), CAS1-3+ Key Match, FEM/BDC Key Match interface
V3.0.0.0
(2019.09.28)
1. Added CAS4 Key Match(OBD) to support(1N35H/5M48H),Exist in BMW Key Match(OBD).
2. Added BMW F/G-series hidden code
3. Added BMW Key Match(OBD),Automatic identification of BMW anti-theft type(Contain:CAS1-3+ Key Match,CAS4 Key Match,FEM/BDC Key Match)
V2.9.0.0
(2019.09.12)
1. Added French version
2. Added: B48 B58 read ISN
3. Added: MSD80/D81/D85/D87/MSV90 read ISN
4. Added: N13/N20/N55/B38 ISN read and write
5. F system code increases the function of modifying VO code
6. E system code brush hiding function to increase the search button
V2.8.0.0
(2019.07.20)
1. Added Spanish version
2. BMW EGS Change: increase EGS_6HP
3. Fix E series programming E89, R56 car English version display problem; Increase the detection of foot space on programming CAS
4. Optimize BMW diagnostics, E system code interface
V2.6.0.0
(2019.03.05)
1. Added: EWS1-3 key matching function.
2. The E-code is modified to modify the VO code function, and the VO code can be added or deleted directly by the selection method, and the operation is simpler.
3. The BMW data modification adds support for both N13 and N55 engine data.
V2.5.0.0
(2019.01.10)
1. Added BMW E series programming, support single module programming of E60, E65, E70, E89, R56 and other chassis models (multimedia module requires fiber optic communication, temporarily not supported).
2. Added BMW E series code, support E60, E65, E70, E89, R56 and other chassis models single module code, backup code and recovery code.
3. FEM/BDC key matching: Add 0000155E.018_120_010, 00002419.081_010_020 two versions of FEM/BDC with key.
4. F/G system programming: increase the support of swfk, flup, blup programming files, and fix some programming failures.
5. CAS1-CAS3+ key matching: increase the Rolls-Royce CAS1, CAS2 key matching.
6. BMW data modification: Add CAS3+, CAS4+ ISN encryption and decryption functions.
7. Maserati Mileage Adjustment: Added the function of saving EEPROM data.
8. BMW F-series codding:Fix List display incomplete.
